Angle broom SA
The angle broom is suitable for cleaning large surfaces, roads or industrial floors or for removing a thin layer of fresh snow.
It is not equipped with a collection bucket, but has an angle of ± 30 ° to the right or left, allowing the swept material to be moved sideways. The angle is manual in the standard versions; on request it can be hydraulic, by means of a solenoid valve.
The SA 155, SA 180 and SA 210 models are equipped, in the standard version, with a floating system that allows the brush roller to always remain in contact with the surface for effective cleaning quality.
The brush roller is made up, in the standard version, of polypropylene zig-zag rings with steel core; upon request, it is possible to make the brush roller composed of 50% polypropylene rings and 50% steel rings, alternating, for heavier jobs or the presence of wet asphalt, encrusted material, etc.
The transmission takes place, in all models, with a direct motor on the brush shaft. In the SA 220, SA 240 and SA 260 models the motor (for the SA 240 and SA 260 models there are two hydraulic motors) is completely integrated inside the brush shaft to reduce the external dimensions and protect it from any impact or damage .
On request, gravity or pressure watering kits are available, with 100L capacity tank and sprayers.
Angle broom SA
The angle broom is suitable for cleaning large surfaces, roads or industrial floors or for removing a thin layer of fresh snow.
It is not equipped with a collection bucket, but has an angle of ± 30 ° to the right or left, allowing the swept material to be moved sideways. The angle is manual in the standard versions; on request it can be hydraulic, by means of a solenoid valve.
The SA 155, SA 180 and SA 210 models are equipped, in the standard version, with a floating system that allows the brush roller to always remain in contact with the surface for effective cleaning quality.
The brush roller is made up, in the standard version, of polypropylene zig-zag rings with steel core; upon request, it is possible to make the brush roller composed of 50% polypropylene rings and 50% steel rings, alternating, for heavier jobs or the presence of wet asphalt, encrusted material, etc.
The transmission takes place, in all models, with a direct motor on the brush shaft. In the SA 220, SA 240 and SA 260 models the motor (for the SA 240 and SA 260 models there are two hydraulic motors) is completely integrated inside the brush shaft to reduce the external dimensions and protect it from any impact or damage .
On request, gravity or pressure watering kits are available, with 100L capacity tank and sprayers.
Video
Direct motor transmission:
Transmission with direct motor on the brush shaft (2 hydraulic motors for the SA 240 and SA 260 models). This ensures easier replacement of the brush rings and requires less maintenance than versions with pinion and chain transmission.
Standard floating system for models SA 155, SA 180 and SA 210:
The floating system allows the sweeper to always remain in an optimal position with respect to the ground in order to carry out its work. For models SA 220, SA 240 and SA 260 the parallelepiped floating system is supplied as an option.
Standard floating system for models SA 155, SA 180 and SA 210:
The floating system allows the sweeper to always remain in an optimal position with respect to the ground in order to carry out its work. For models SA 220, SA 240 and SA 260 the parallelepiped floating system is supplied as an option.
Angulation of ± 30 ° (hydraulic by means of hydraulic cylinders on request)
Possibility to push the swept material sideways. The mechanical-manual angle with 3 possible positions is done by means of sturdy mechanical cylinders and pins for fixing. The angle can be hydraulic (on request, carried out by means of a solenoid valve to effect the exchange.
Photo gallery
Share products
